|
Launch Automotive Scanner CReader 8001 with ABS,SRS ECU Coverage and Oil reset + EPB reset
     
Product Introduction:
Creader 8001 is a small-size multipurpose Creader. It provides ten OBDII/EOBD diagnostic modes and also the following functions: oil reset, set service mileage, EPB reset. In addition, it supports ABS and SRS diagnosis to facilitate all-around car detection.
Highlight:
FULL FUNCTION OBDII SCANNER: The code reader Launch CReader 8001 provides full OBD and EOBD diagnostic functions and reads common protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4. Works on all OBDII compliant vehicles manufactured since 1996 (1996 to Current). The diagnostic scanner can help you diagnose your car, and read the fault diagnostic code, show what’s wrong with your car.
POWERFUL FEATURES: Full OBDII/EOBD Diagnostic Functions, including - Read & Clear DTCs, ABS and SRS, Oil Light and EPB Reset, Query Freeze Frame Data, Read Dynamic Datastream, Read Vehicle Information, O2 Sensor Test, Evap Systems Test, On-board Monitor Test, Read Pending Fault Code, Read Permanent DTC, Read Readiness Status, Turn-off Malfunction Indicator Light (MIL), Print Data to PC, Permanent Code Retrieval, and more.
ALL THE LATEST TEST MODES: This obd2 scanner includes all the latest OBDII test modes (modes 1 to 10), including full on-board monitor testing. Save and review test data, with the ability to view and graph the datastreams.
DIAGNOSE, RECORD, REVIEW: You can do realtime DTC and datastream testing, and you can also record all the scanner testing and review all the data with this scan tool. You can even print out the results on your computer printer so you can talk about the results later with your friends or fellow mechanics.
SMART DESIGN: Color viewscreen and smart hotkeys make this automotive scanner an ideal tool for professional technicians as well as knowledgeable mechanics who do car maintenance work at home. Comes with all the accessories you need to get started using it right away.
Support Languages:
English, Spanish, French, Russian, German, Portuguese, Japanese
Product Functions:
1. OBD full functions
1) Read dynamic data streams and MIL
2) Read readiness status
3) Query freeze frame data
4) Read current DTCs
5) Clear DTCs
6) O2 sensor test
7) On-board monitor test
8) Read pending DTCs
9) On-board system or component control
10) Read vehicle information
11) Read permanent DTCs
2. EPB reset
3. Oil reset
4. Read DTCs, clear DTCs, and read data streams for the ABS system
5. Read DTCs, clear DTCs, and read data streams for the SRS system
6. Color and graphical display of data streams
7. Query DTCs
8. PC internet free update
9. Multilingual support
10. Print data via PC
Specifications:
|
Screen:
|
|
4.0"TFT 320*480 dpi
|
|
Voltage Range
|
|
9-18V
|
|
Operating Temperature:
|
|
0℃~ 50℃(32℉-122℉)
|
|
Environment Temperature:
|
|
-20℃~70℃(-4℉-158℉)
|
|
Dimension:
|
|
195mm*86mm*32 mm (7.6" *3.4" *1.2")
|
|
Weight:
|
|
<460g
|
How to update the software of CR8001?
1. Go to the official website of LAUNCH "www.dbscar.com", click "Products" -> "creader 4001~9081"; find the "creader 8001", then down load the update tool to your computer.
2. Install the update tool on your computer
3. Connect the Creader 8001 to your computer via the USD data lines in the package.
4. Run the update tool software, fill in the serial number and register code of creader 8001 (The serial number and register code will be found on the screen when you conect creader 8001 to your PC), click the update. Please keep the device connected and ensure the network works well.
CR8001 has 3 main functions:
1. Support car models for OBDII diagnostic function:
All cars that suport OBDII, from 1996 to present (America cars), 2002 to present (Europe cars), 2008 to present (Asia cars), 2005 to present (Japanese cars).
2. ABS / SRS test
3. Support car models for Reset functions:
Oil Reset:
EPB Reset:
 
|
