ISUZU Truck Diagnostic Scanner Scanner Full Set
This unit has 2 software card.
1) V169 version: support Euro 4 Euro 5 Isuzu Trucks
2) V11.700 version: support common Isuzu Trucks
Please tell us which car you need?
If you need this 2 card, it need to pay extra software card
ISUZU TECH2 with ISUZU 24V adapter for truck diagnostic software version
Display language can be selected according customer's demand
Supporting hybrid and CNG vehicles
Software Language: Czech Denish German Greekn English Spanish Finnish French Croatian Hungarian Indonesian Italian Jananese Dutch Norwegian Portuguese(Bazil) Russian Sweden Thau Turkey Traditional Chinese Simplified Chinese
Isuzu Tech2 full set, one unit
Isuzu 24V adatper for truck test,one unit
32mb software card, one unit
ISUZU Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 to 2012
Authentic ISUZU software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model ISUZU vehicles.
Support for on-board diagnostics on all ISUZU systems 1992 current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
The authentic ISUZU 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
ISUZU Tech-2 Specifications
32 bit, 16 MHz
32 MB flash type II PCMCIA. Type III slot available for future expansion.
Integral RS232 communication port.
3.8″×2.8″ backlit monochrome with full graphics capability: 320×240 pixels. Displays up to 9 vehicle parameters at once
ISUZU Tech-2 Starter Kit with Candi Module & TIS Kit includes :
Tech-2 Flash Tester
32 MB PCMCIA Card with ISUZU OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet download ( 199.2 kb )
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module.
The module connects between the Tech 2 Flash’s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all Isuzu vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.