Launch official store eobd function code reader CR8021 diagnostic tool obd2 scanner with oil reset
Product Introduction:
CReader 8021 is a small-size multipurpose CReader. It provides ten OBDII/EOBD diagnostic modes and also the following functions: oil reset, set service mileage, EPB reset. In addition, it supports ABS and SRS diagnosis to facilitate all-around car detection.
Support Languages:
English, Spanish, French, Russian, German, Portuguese, Japanese
Product Functions:
1. OBD full functions
1) Read dynamic data streams and MIL
2) Read readiness status
3) Query freeze frame data
4) Read current DTCs
5) Clear DTCs
6) O2 sensor test
7) On-board monitor test
8) Read pending DTCs
9) On-board system or component control
10) Read vehicle information
11) Read permanent DTCs
2. Oil reset
3. Electrical Parking Brake(EPB) reset
4. Battery Management System(BMS) reset
5. Steering Angle Sensor(SAS) reset
6. Read DTCs, clear DTCs, and read data streams for the ABS system
7. Read DTCs, clear DTCs, and read data streams for the SRS system
8. Color and graphical display of data streams
9. Query DTCs
10. Free update via internet
11. Multilingual support
12. Print data via PC
Specifications:
Screen:
|
|
4.0"TFT 320*480 dpi
|
Voltage Range
|
|
9-18V
|
Operating Temperature:
|
|
0℃~ 50℃(32℉-122℉)
|
Environment Temperature:
|
|
-20℃~70℃(-4℉-158℉)
|
Dimension:
|
|
195mm*86mm*32 mm (7.6" *3.4" *1.2")
|
Weight:
|
|
<460g
|
How to update the software of CR8021?
1. Go to the official website of LAUNCH "www.dbscar.com", click "Products" -> "creader 4001~9081"; find the "creader 8021", then down load the update tool to your computer.
2. Install the update tool on your computer
3. Connect the Creader 8021 to your computer via the USD data lines in the package.
4. Run the update tool software, fill in the serial number and register code of creader 8021 (The serial number and register code will be found on the screen when you conect creader 8021 to your PC), choose the softwares that you need, click the update. Please keep the device connected and ensure the network works well.
CR8021 has 3 main functions:
1. Support car models for OBDII diagnostic function:
All cars that suport OBDII, from 1996 to present (America cars), 2002 to present (Europe cars), 2005 to present (Japanese cars), 2008 to present (Asia cars).
2. ABS / SRS test
3. Support car models for Reset functions:
EPB Reset:
BMS Reset:
SAS Reset:
|